Academician of the hottest engineering academy int

2022-08-08
  • Detail

Academicians of the Chinese Academy of Engineering interpret the top ten manufacturing hotspots in 2012. On March, 2013, the 2013 China industry and Information Integration Development Summit Forum with the theme of the new long march of China's manufacturing industry transformation and the 2012 (10th) China manufacturing year-end inventory award ceremony, jointly organized by the National Engineering Center for manufacturing equipment digitalization and China manufacturing information portal (e-works), were held in Beijing Longzhong

at the summit forum, lipeigen, President of Huazhong University of science and technology and academician of the Academy of engineering, released the top ten hot spots of China's manufacturing industry and informatization in 2012 and made a detailed interpretation

president of Huazhong University of science and technology and academician of the Academy of engineering, Li Fazhan, most of the countries have adopted the material development strategy of "one batch of research and development, one batch of reserve and one batch of utilization". Bacon

2012 the top ten hot spots in China's manufacturing industry are:

hot spot 1: the V-shaped curve of China's manufacturing industry

the emergence of the V-shaped curve of industrial economic growth is the result of the joint action of long-term factors and short-term factors. It is also the result of China's industrial economy after a long period of growth, Must face the adjustment process. In view of the new situations and changes in the current economic operation, we should attach greater importance to stabilizing growth, strive to improve the economic operation environment, effectively ease the difficulties of enterprises, and strive to overcome the impact of the economic downturn

hot spot 2: promote the deep integration of the two modernizations and lay out the new four modernizations development model

at present, the application of new generation information technology represented by the next generation of Internet, IOT, cloud computing, etc. is bringing great opportunities for China to promote the deep integration of the two modernizations. We will vigorously promote the in-depth integration of industrialization and industrialization, accelerate the transformation of manufacturing mode to digitalization, networking, intelligence and service, give full play to the integration advantages of using informatization to drive industrialization and industrialization to promote informatization, drive industrial upgrading and enhance competitiveness

hot spot 3: going out and encountering barriers, Chinese manufacturing enterprises seek breakthroughs

as a major trading country, China has maintained a long-term trade surplus with many European and American countries. In recent years, due to the pursuit of trade balance and coercion. 6. Results reproduction: the experimental results can be accessed at will, and other factors, European and American countries' trade barriers against Chinese manufacturing continue to increase. In 2012, Chinese manufacturing enterprises encountered trade barriers when going to sea, which was characterized by increased interference from non market factors

hot spot 4: high end equipment manufacturing has developed steadily and become a new engine to promote industrial transformation

in recent years, China's high-end equipment manufacturing industry has formed a certain industrial scale and made breakthroughs in many fields. High end equipment manufacturing industry is a strategic emerging industry led by high and new technology, which is at the high end of the value chain and the core link of the industrial chain, and determines the comprehensive competitiveness of the entire industrial chain. It is the backbone of the modern industrial system and the engine to promote industrial transformation and upgrading

hot spot 5: cloud manufacturing creates a new service model for enterprises

with the continuous upgrading of the pressure and challenges faced by China's manufacturing industry, Chinese manufacturing enterprises have begun to actively explore the transformation of development mode. The manufacturing industry has shifted from product competition to service competition. The development of cloud computing will trigger the competition of manufacturing enterprises in technological innovation and business model innovation. At a time when the development of cloud computing is surging, manufacturing enterprises should have the courage to try, develop in the direction of manufacturing service, and move forward to the high end of the value chain

hot spot 6: many industries are trapped in a strange circle of overcapacity, with prominent contradiction between supply and demand.

2012, under the impact of overheated investment in the domestic market and shrinking international and foreign demand, many industries in China experienced overcapacity, even emerging industries were not spared. Chemical products such as nitrogen fertilizer, calcium carbide, chlor alkali, methanol and plastics, as well as non-ferrous industries such as copper smelting and lead-zinc smelting, are now facing the risk of excess due to the rapid growth of investment in previous years. Emerging industries such as polysilicon, wind power equipment and new materials also have overcapacity

hot spot 7: the rise of the CNC generation equipment industry in China

with the implementation of the CNC generation project, with the application and promotion of CNC technology and products as the traction, improve the independent innovation ability of enterprises in the mechanical equipment industry, change the production mode, improve the production efficiency, increase the added value of mechanical equipment products, realize the transformation and upgrading of products and the upgrading of mechanical equipment, and vigorously promote the scientific and technological progress in the field of mechanical engineering in China, Finally realize the rise of China's equipment industry

Hot spot 8: influenced by multiple factors, the return of Western high-end manufacturing industry in 2012, the pace of the return of western manufacturing industry led by the United States did not stop, but there were voices everywhere. According to a survey of 108 multinational companies headquartered in the United States by David hinchlivey, a supply chain management expert at the Massachusetts Institute of technology, 14% of the enterprises clearly intend to move some manufacturing industries back to the United States, and one third of the enterprises surveyed said they are considering taking measures to return

hot spot 9: 3D printing opens the manufacturing industry 2.0 era

it is predicted that by 2015, its market scale will reach US $3.7 billion. This means that the direct output value of 3D printing market will double in the next three years. More importantly, behind this good market prospect is the innovation of manufacturing production mode. As a large manufacturing country, Chinese manufacturing enterprises must be fully prepared for the possible manufacturing revolution, and take advantage of it to realize the transformation and innovation of China's manufacturing industry

hot spot 10: the marine industry will bring new opportunities to the manufacturing industry.

strengthening scientific and technological support is the only way to develop the marine economy. To develop the marine economy and build a marine power, we cannot do without the support of science and technology. With the development of marine industry and the development of marine resources, the dependence on Marine Science and technology becomes stronger and stronger. Although China's Marine Science and technology started late, the country has paid more and more attention to it and invested more and more. After accelerated development in recent years, it has been in the forefront of the world in many aspects

2012 the top ten hot spots of China's manufacturing informatization are:

hot spot 1: group enterprises favor private cloud, and cloud investment needs to be rational.

cloud computing, as an emerging technology, has become China's industrial development strategy. Many regions have also invested heavily in establishing cloud computing centers. However, this large-scale investment has not brought much practical applications and benefits, On the contrary, manufacturing enterprises are calm when choosing cloud computing mode. For the sake of data, security and service quality, they prefer to establish enterprise level private cloud, and are still in a wait-and-see state for public cloud

hot spot 2: the manufacturing industry began to pay attention to big data

in 2012, various solution suppliers laid out big data and set off a big data boom. Manufacturing enterprises paid attention to and laid out big data. China's manufacturing big data mainly covers product data, operation data, value chain data and external data. With the gradual integration of mobile applications into enterprise business, social data is also becoming a part of big data in manufacturing. Effective extraction and analysis of big data can help enterprises obtain valuable business and market information, so as to help enterprises make quick and accurate decisions

hot spot 3: system engineering and PLM application are gradually integrated

with the deepening of product complexity, the products developed by enterprises often involve multiple systems such as machinery, electronics, software and control, which requires an interdisciplinary environment such as better wear resistance and fatigue resistance engineering of the system. Scientific research is focused on customer needs and required functions in the early development cycle, These requirements and functions are transformed into different system models of product components to form a virtual operation system of new products, and the requirements are designed, synthesized and systematically verified

hot spot 4: byod, the revolution of mobile office

in 2012, the concept of byod was frequently mentioned by major manufacturers. The emergence of byod mode is the result of it consumerization. The driving force for the development of this mode comes from employees rather than enterprises. Employees' preferences drive enterprise business innovation. At this stage, enterprise mobile applications have entered the stage from why to how to adopt them. People focus on the security and complexity problems brought by mobile applications

hot spot 5: the application upsurge has triggered enterprises to reflect on the essence of MES

at present, manufacturing enterprises have strong demand for MES, but there is blind compliance; The suppliers are very enthusiastic. The concepts come out and the versions are constant. The current MES market in China is somewhat similar to the chaos in the ERP field around 2000. Because MES has strong industry characteristics, under the upsurge, manufacturing enterprises should calmly think about how to select and implement MES, and how to ensure the desired results

hot spot 6: social applications accelerate enterprise collaboration

with the popularity of social tools such as Facebook, twitter, youtube, Weibo and instant messaging, and the growing maturity of Web2.0 Technology in personal and enterprise computer applications, the world has entered a social era. Socialization has changed people's habits of using software and Internet, and is affecting the development and design of enterprise products

hot spot 7: enterprises pay attention to full 3D design and deepen application

with the continuous deepening of 3D design application, enterprises have gradually realized that only relying on a single digital design can not really give full play to the value of digital models. Based on the three-dimensional production model in the design stage, Shandong Star High Tech's notice on the 2018 New Year holiday, we must effectively realize the three-dimensional, intelligent, collaborative and service-oriented design and manufacturing process. It is necessary for enterprises to combine 3D model with digital manufacturing and digital process while designing 3D model, so as to realize full 3D design and deepen application

hot spot 8: e-commerce in manufacturing industry opens up a new direction for enterprise transformation

the intensive bombing of large-scale promotions has made 2012 a bumper year for e-commerce. As a Chinese manufacturing industry in an important period of transformation, it is urgent to explore a new direction suitable for enterprise transformation in the new period. The current e-commerce boom has undoubtedly given new guidance to enterprises, and the new model of e-commerce is bound to blaze a trail for the transformation of traditional manufacturing industry

hot spot 9: diversified demand drives the rapid development of data collection

at present, with the development of mobile Internet and IOT and the arrival of the era of intelligent application, the data collection that manufacturing enterprises pay attention to is no longer limited to the collection of production data, but an all-round expansion to enterprises, extending to the real-time data collection of supply chain, logistics, e-commerce and other systems

hot spot 10: it operation and maintenance clings to the business and moves towards automation.

with the deepening of virtualization applications, the traditional IT operation and maintenance methods that rely on manpower can no longer meet the needs of current enterprises. At the same time, the high it operation and maintenance has become an obstacle for enterprises to further deepen the application of information technology. In 2011, using intelligent IT operation and maintenance software to realize real-time monitoring and automatic scheduling of enterprise IT resources and business resources has become a new trend of it operation and maintenance development in the new era

Copyright © 2011 JIN SHI